The PTFE tape wire suitable for bending occasions, mainly used for all kinds of aircraft, airships, armored fighting vehicles, ships and other purposes of internal electrical equipment and instrument circuit connection under high temperature environment.
1. High temperature resistance
2. Cold resistance
3. Good softness
4. Aging resistance
5. Anti-interference
6. Easy insulation stripping
7. Easy welding conductor
8. Small diameter
9. Especially suitable for frequent bending occasions
1. Rated voltage: 125V, 300V, 600V
2. Working temperature: -60 ~ 250℃, short-term temperature 350℃
3. Conductor bare copper stranded, silver plated copper stranded or nickel plated copper stranded
4. Insulation: PTFE tape (PTFE tape insulation)
5. Color: red/yellow/blue/white/black/gray/brown/purple/green etc.
6. Test voltage: 1000V, 1500V, 2500V
| Conductor |
Insulation thickness
mm | Wire outer diameter
mm | Resistance of insualtion |
Nominal section area
mm2 | single wire x dia. | Conductor Dia.
mm | 110V | 250V | 600V | AFR-250 type | AFRP-250 type | MΩ·km |
| mm | 110V | 250V | 600V | 110V | 250V | 600V | |
| 0.013 | 7×0.05 | 0.15 | 0.1 | 0.15 | 0.25 | 0.38 | 0.49 | 0.71 | 0.7 | 0.82 | 1.02 | 5×103 |
| 0.035 | 7×0.08 | 0.24 | 0.1 | 0.15 | 0.25 | 0.47 | 0.58 | 0.81 | 0.85 | 0.91 | 1.14 |
| 0.06 | 7×0.10 | 0.3 | 0.1 | 0.15 | 0.25 | 0.55 | 0.65 | 0.87 | 0.9 | 0.97 | 1.2 |
| 0.08 | 7×0.12 | 0.36 | 0.1 | 0.15 | 0.25 | 0.6 | 0.7 | 0.93 | 1 | 1.03 | 1.26 |
| 19×0.07 |
| 0.1 | 7×0.14 | 0.42 | 0.1 | 0.15 | 0.25 | 0.7 | 0.83 | 1 | 1.05 | 1.15 | 1.3 |
| 19×0.08 |
| 0.14 | 7×0.16 | 0.5 | 0.1 | 0.15 | 0.25 | 0.73 | 0.85 | 1.05 | 1.05 | 1.18 | 1.45 |
| 19×0.10 |
| 0.2 | 7×0.20 | 0.6 | | 0.15 | 0.3 | 0.85 | 0.97 | 1.3 | 1.3 | 1.4 | 1.7 |
| 19×0.12 |
| 0.35 | 7×0.25 | 0.8 | | 0.15 | 0.3 | | 1.2 | 1.5 | | 1.6 | 1.9 |
| 19×0.16 |
| 0.5 | 7×0.30 | 0.9 | | 0.15 | 0.3 | | 1.3 | 1.6 | | 1.7 | 2 |
| 19×0.18 |
| 0.8 | 7×0.37 | 1.1 | | 0.2 | 0.3 | | 1.65 | 1.85 | | 2.05 | 2.3 |
| 19×0.23 |
| 1 | 19×0.26 | 1.3 | | 0.2 | 0.3 | | 1.88 | 2 | | 2.25 | 2.45 |
| 1.2 | 19×0.28 | 1.4 | | 0.2 | 0.3 | | 1.95 | 2.15 | | 2.38 | 2.55 |
| 1.5 | 19×0.32 | 1.6 | | 0.2 | 0.3 | | 2.15 | 2.35 | | 2.63 | 2.83 |
| 2 | 19×0.37 | 1.85 | | 0.2 | 0.3 | | 2.4 | 2.6 | | 2.97 | 3.08 |
| 2.5 | 19×0.14 | 2.34 | | 0.2 | 0.35 | | | 2.95 | | 3.2 | 3.43 |
| 49×0.26 |
| 3 | 49×0.28 | 2.52 | | 0.2 | 0.35 | | | 3.1 | | 3.37 | 3.5 |
| 4 | 49×0.32 | 2.88 | | | 0.35 | | | 3.52 | | | 4.12 |
| 6 | 49×0.39 | 3.51 | | | 0.35 | | | 4.15 | | | 4.75 |
Noted:Specification and core no. are not limited to above regulation,they could be customized.
